EtherHaul Operation, Administration and Maintenance Manual
Page 42
License upgrade key is a signature file containing the license configuration that is based
on the system's serial number. License file will be provided by Siklu as a text file that can
be opened with any text editor. The license file name will always be
<system_serial_number>.lic.
The license upgrade is done using an external FTP/TFTP/SFTP server. Refer to server's
configuration as defined in the File Transfer section.
The license upgrade process consists of 2 steps:
1) Download. Transferring the new license file to the system.
2) Enable. Enabling the license components. Note that is you restore factory
default configuration, the system will come up with the available license
components enabled.
The Licensing section displays the current configuration of the license components
(data-rate and features enable/disable) and states if license component is available
(permission).
The License File Name is an R/O field that will always be according to the
system's serial number (<system_serial_number>.lic).
Click Load to load a new license file. As the license file name is always
<system_serial_number>.lic, it will be displayed as the License File Name.
Use the checkboxes to enable/disable license components.
The data rate license active on the system dictates the highest modulation profile the
link will reach:
Data rate of 100 or 200 Mbps – max modulation profile QPSK 4 1 0.5.
Data rate of 500 Mbps – max modulation profile QAM16 4 1 0.5.
Data rate of 1000 Mbps – max modulation profile QAM64 4 1 0.5.
Enabling license components will introduce a momentary service disruption.
To Next Page
Loading...
