VITTORIO VENETO 10/10/2012
CE DECLARATION OF MACHINE COMPLIANCE
SILCA S.p.A. - VIA PODGORA 20 ( Z.I.)
31029 VITTORIO VENETO (TV) - (ITALY)
TEL. 0438 9136 - FAX. 0438 913800
Declares under its own responsibility that the Key-cutting machine model
UNOCODE 199
complies with the requirements of the following European Directives:
European Union DIRECTIVE 2006/42/CE (Machines)
and with the EN 292/1 – EN 292/2 Standards
European Union DIRECTIVE 2004/108/CE
(Electromagnetic Compatibility)
and with the EN 55022 : 1998 + A1 : 2000 - EN 55024 : 1998
EN 61000 – 3 – 2 : 2000
EN 61000 - 3 – 3 :1995 + A1 : 2001 Standards
European Union DIRECTIVE 2006/95/CE
(Low Voltage) | 12 |
and with the EN 60204-1 ( sections 20.2 – 20.3 – 20.4 ) Standards
Claudio Tomasella of the Silca S.p.A. Research & Development Division is authorized
to create a Technical File.
Operations Director
To Next Page
Loading...
