fits your navigation needs before NAV mode is activated. Refer to
"Arrival mode" on page 95.
NAV mode options
While in NAV mode the following buttons are available in the
autopilot controller:
Restart
Restarts the navigation from the vessel’s current position.
Skip
Skips the active waypoint and steers towards the next waypoint.
This option is only available when navigating a route with more
than one waypoint between the vessel position and the end of the
route.
Turn pattern steering
The system includes a number of automatic turn steering features.
When a turn pattern is activated, the system creates temporary
waypoints on the turn.
The last waypoint on the turn is the final waypoint. When the vessel
reaches the final waypoint, the vessel goes into arrival mode. Refer
to "Arrival mode" on page 95.
Starting a turn
• Select the port or starboard button
92
Trolling motor autopilot | GO XSE/XSR Operator Manual
To Next Page
Loading...
