Turn variables
All turn patters have settings that you can adjust before you start a
turn, or at any time when the boat is in a turn.
U-turn
Changes the current set heading by 180°.
Turn variable:
• Turn radius
C-turn
Steers the vessel in a circle.
Turn variable:
• Turn radius
• Degrees to turn
Spiral
Makes the vessel turn in a spiral with a decreasing or increasing
radius.
Turn variables:
• Initial radius
• Radius change per loop
• Number of loops
Zigzag-turn
Steers the vessel in a zigzag pattern.
Trolling motor autopilot | GO XSE/XSR Operator Manual
93
To Next Page
Loading...
