Robertson AP9 Mk3 Autopilot
II 20169223D
Document revisions
Documentation
department
Hardware/Software
design
Project/Product
Management
Rev Date Sign Date Sign Date Sign
– 10.04.96
N.G.
10.04.96
G.K.
10.04.96
Th.H.
A 30.05.96
N.G.
30.05.96
G.K.
30.05.96
Th.H.
B 12.07.96
N.G.
12.07.96
T.J.
12.07.96
Th.H.
C 3.9.99
N.G.
3.9.99
T.J.
3.9.99
Th.H.
D 07.11.00
N.G.
07.11.00
T.J.
07.11.00
T.R.
Document history
Rev. – First edition
Rev. A Updated table of contents and references throughout the manual
Rev. B Minor corrections in table page 1-6 and fig. 1-5. New dimensional
drawing of control unit, fig. 4.1. Section 5: Due to modified PCBs the
instructions for ferrite core mounting are omitted. New component
layout and set-up procedure for Dual Analogue Board included. Section
8: Updated circuit diagrams included. Section 9: Certificate of Type
Approval included.
Rev. C New layout. Section 2 and 5 revised according to new software version
V1R3. Diagrams updated. Dimensional drawing of RF Standard
Transmission link included. D9X Bus cable connection included. Index
and distributor list included.
Rev. C has not been released.
Rev. D Updated according to software version V1R4.