Simrad Robertson AP9 Mk3 User Manual

Robertson AP9 MK3 Autopilot
2-20 20169223D
AP9 MK3 Dual Station
Transfer of command from one unit to the other unit is made by
pressing the HELMSMAN button on the respective control unit.
Change of steering mode is made either on the control unit mode
buttons or by a separate mode selector.
Mode control function may also be included in an NFU lever (S9
connected for mode control, see mode selection).
All parameters can be readjusted from both units.
Note ! Compass selection and selection of NAV-mode (XTE-CTS-PRIORITY-
ECDIS) can only be made from the main station.
Additional equipment can be connected as for the Main unit.
The following description of operation for the optional equipment
also applies for the dual station configuration, when installed.
AP9 Mk3 REMOTE
MODE SELECTOR
S9
S9
FU91
AP9 Mk3 MAIN
MODE SELECTOR
FU91
PORT STBD
MODE
COURSE
F200
F200-40
PORT STBD
MODE
COURSE
F200
F200-40

Simrad Robertson AP9 Mk3 Specifications

General

Brand	Simrad
Model	Robertson AP9 Mk3
Category	Boating Equipment
Language	English