Simrad SP70 - Store; Store (Mode)

Simrad SP70
136
850--164186 A
Store
The Store button is located in the Store/Recall index menu.
Figure 131 - Store button
The Store button is used for storage of a sequence loop or single
display pictures, which can be selected in the Store mode menu.
If a sequence loop storage is selected, this button is used for start
and stop of the storage. If single picture storage is selected, a new
picture storage is made each time the button is pressed.
Store (mode)
The Store (mode) button is located in the Store/Recall index
menu.
Figure 132 - Store
Mode submenu
The Store (mode) menu is used for selecting the storage function
of the Record button on the operating panel. The storage could be
selected to be single shots, or different ping- or time sequences.