Simrad SP70
138
850--164186 A
T ime and Date
Time and Date functions are battery powered and stored in the
memory when the sonar is switched off.
Figure 135 - Time
and date submenu
The submenu is common for changing time and date settings. For
time adjustments, use the cursor and select the actual digit. Then
use the Up/Down buttons below the clock for adjustment and
terminate by selecting the OK button.
The date adjustment has separate windows for month, year and
date. Terminate the adjustment by selecting the OK button.
If any time and date adjustment is made during the 1- month free
option test period, the actual option will be closed.
Position
Position readouts are repetitions of the GPS data, and therefore
presuppose connection of a (D)GPS signal to the Processor Unit.
These buttons have no submenus. When the system is operating
normally, and no warnings are displayed, it will present the
vessel’s position. The position will be in the form of latitude and
longitude, and is received from the vessel’s global positioning
system (GPS).
To Next Page
Loading...
Need help?
General
