Section 05 ENGINE MANAGEMENT
Subsection 02 (COMPONENT INSPECTION AND ADJUSTMENT)
3
A34F0HA
12
1. Adjustment nut
2. Jam nut
3. Throttle lever stopper
Tighten jam nut and recheck adjustment.
WARNING
Make sure idle speed stopper contacts throt-
tle cam when throttle lever is fully released at
handlebar.
Closed Throttle and Idle Actuator Reset
Perform the Closed Throttle and Idle Actuator re-
set as described in THROTTLE POSITION SEN-
SOR (TPS) in ELECTRONIC MANAGEMENT be-
low.
Te m pla te 183