Section 01 SERVICE TOOLS AND SERVICE PRODUCTS
Subsection 02 (SERVICE PRODUCTS)
SERVICE PRODUCTS
Retaining compound
(P/N 413 703 100)
Loctite
®
RC/609:
Retaining compound
(10 mL) (green)
APPLICATION
Used for retaining bushings,
bearings in slightly worn hous-
ing or on shaft.
Medium-strength threadlocker
(P/N 293 800 060)
Loctite
®
243: Threadlocker
(10 mL) (blue, medium strength)
APPLICATION
Flywheel nut, crankcase studs,
etc.
NOTE: This product replaces
Loctite 242 (P/N 293 800 015).
High strength threadlocker
(P/N 293 800 005)
Loctite
®
271:
Threadlocker (10 mL) (red, high
strength)
APPLICATION
Fasteners and studs up to
25 mm (1 in) diameter.
Sealing compound
(P/N 420 297 906)
(30 mL)
APPLICATION
To seal crankcase on all ZX series
engines.
NOTE: This product replaces the
larger tube (P/N 420 297 905).
Paste gasket
(P/N 413 702 700)
Loctite
®
515:
Gasket eliminator (50 mL)
APPLICATION
Crankcase halves and gearbox
mating surfaces.
Paste gasket
(P/N 293 800 038)
Loctite
®
518:
Gasket eliminator (50 mL)
APPLICATION
Crankcase halves and gearbox
mating surfaces.
Loctite
®
primer
(P/N 293 800 041)
PrimerN128g(5oz)
APPLICATION
To prepare mating surfaces be-
fore applying paste gasket, re-
taining compound or threadlock-
ers.
NOTE: Only the P/N has been
changed. This product is identi-
cal to the P/N 413 708 100.
Te m pla te 21