Section 12 WIRING DIAGRAM
Subsection 01 (WIRING DIAGRAM)
HOUSING REFERENCE CODE
PER AREA
The next two letters of the connector identification
number represents a connector reference code. If
there are many connectors in the same area this
helps identify which wire is in which connector.
- M C
D
XX/XX
A00I04I
1
MC
WIRE LOCATION IN CONNECTOR
HOUSING
The third portion of the connector identification
number represents the location of the wire in the
connector housing. This could be identified by ei-
ther a number such as 1, 2, 3 or by a letter such as
A, B, C depending on the type of connector used.
XX/XX
A00I04H
D
D
1- MC
320 Te m plat e
To Next Page
Loading...
Need help?
General
