transfer power to the drive wheel with
traction.
The function can also prevent the slipping
or spinning of drive wheels on the pave-
ment during acceleration.
Anti rollover protection
The function can reduce the risk of rollover
due to sudden evading or vehicle slipping.
If the vehicle is in a dangerous state, the
electronic stability control system reduces
the torque output and applies the brake to
one or more wheels until the stability is
recovered.
Electronic Stability Control Sport Mode
Overview of Electronic Stability Control
Sport Mode
The driver can select Electronic Stability
Control Sport Mode to acquire much more
active driving experience.
If Electronic Stability Control Sport Mode is
selected, system intervention will be re-
duced, allowing increased vehicle slipping.
When Electronic Stability Control Sport
Mode is selected, the assistance provided
by Electronic Stability Control for the driv-
er is limited.
If the vehicle is trapped and cannot move
out or driving on a soft surface, such as
sand or snow, Electronic Stability Control
Sport Mode can provide greater traction.
Enabling/disabling Electronic Stability
Control Sport Mode
● Tap
>
to enable/disable Elec-
tronic Stability Control Sport Mode.
● Enter the setting interface:
Tap
> Vehicle Settings > Drivin-
g
> ESC Off
to enable/disable Electronic
Stability Control Sport Mode (→ Page
152).
In the driver information display, the indi-
cator
is always on, which indicates
this system is turned off. The system re-
stores normal mode after the vehicle is
started next time.
Park Assist 360 Camera
The Park Assist 360 Camera captures the
situation around the vehicle through the
parking assist cameras and displays the
images on the centre display, providing
you with a panoramic view of the vehicle.
WARNING Accident risk due to im-
proper use of Park Assist 360
Camera
► People, objects, obstacles displayed
on the centre display may seem
closer to the vehicle than they ac-
tually are.
► The parking assist cameras are de-
signed to assist in parking. However,
Park Assist 360 Camera cannot sub-
stitute your attention and judgment.
► There are blind spots for cameras.
Within the blind spots, cameras can-
not detect objects or people around
or near the vehicle.
When the vehicle is shifted to re-
verse
, Park Assist 360 Camera is
enabled automatically . After switch-
ing to park
, if there is no view
switching operation in 5 seconds,
Park Assist 360 Camera will exit .
Park Assist 360 Camera can only be
enabled when the vehicle speed is
less than 30 km/h(19 mph) .
Limitations of Park Assist 360 Camera
● The Park Assist 360 Camera can support
videos and images with multiple views.
● Imaging is affected by the environment,
and may not present real color effects,
for example, illumination influence/
chromatic aberration.
● Due to the limitation of the sensor's
own characteristics, the imaging effects
may be subject to certain deformation/
error, etc.
● Because of visual factors and image de-
formation factors, images can not be
used as the basis for judging the
distance.
● Under the condition of insufficient or
excessive illumination, the imaging
quality will decline to some extent.
112 Driving and parking
To Next Page
Loading...
