1. If necessary, remove or slide the head
restraint
upward and move the seat
backward.
2. Fitting the ISOFIX child restraint system
with TOP TETHER. Observe the child re-
straint system manufacturer's installa-
tion instructions when doing so.
3. Guide the TOP TETHER belt through the
space between the two head restraint
bars under the head restraint.
4. Release the seat rear curtain lace
,
fold the rear curtain upward to gain ac-
cess to the anchorage.
5. Attach the hook of the TOP TETHER belt
to the anchorage
. Be careful not to
twist it.
6. Tension the TOP TETHER belt. Observe
the child restraint system manufactur-
er's installation instructions when doing
so.
7. If necessary, slide the head restraint
downward. Make sure that the correct
arrangement of the TOP TETHER belt is
not affected.
Attaching TOP TETHER to the second row
seat
WARNING Risk of injury or death if
the second row seat backrest is not
locked after the TOP TETHER belt is
installed
If the second row seat backrests are not
locked, they may fold forward in case of
an accident, emergency brake or sudden
steering, resulting in the failure of the
child restraint system to provide the in-
tended protection. The unlocked second
row seat backrests may also cause oth-
er injuries in an accident.
â–º After installing the TOP TETHER belt,
lock the second row seat backrests.
The risk of injury can be reduced by TOP
TETHER. The TOP TETHER belt allows an
additional connection between the child
restraint system attached with ISOFIX/i-
Size and the vehicle.
1. If necessary, remove or slide the head
restraint
upward.
2. Fitting the ISOFIX/i-Size child restraint
system with TOP TETHER. Observe the
child restraint system manufacturer's
installation instructions when doing so.
3. Guide the TOP TETHER belt
through
the space between the two head
44 Occupants safety
To Next Page
Loading...
Need help?
General
