restraint bars under the head restraint
.
4. Guide the TOP TETHER belt
down-
ward and through the space between
the boot screen
and the seat back-
rest
.
5. Attach the hook
of the TOP TETHER
belt to the anchorage
. Be careful not
to twist it.
6. Tension the TOP TETHER belt
. Ob-
serve the child restraint system manu-
facturer's installation instructions when
doing so.
7. If necessary, slide the head restraint
downward. Make sure that the correct
arrangement of the TOP TETHER belt
is not affected.
Installing seat belt-secured child
restraint systems
Always observe the installation instruc-
tions provided by the child restraint sys-
tem manufacturer. Observe the following
general guidelines for seat belt-secured
child restraint systems:
● Make sure that the child restraint sys-
tem is suitable for the child's weight,
height and age.
● Avoid dressing the child with bulky
clothes.
● Never place objects between the child
and the child restraint system.
● Adjust the seat belt of the child re-
straint system for each child accord-
ingly before every journey.
1. Place the child restraint system on a
suitable seat and pull out the seat belt
completely. Tighten and fasten the seat
belt according to the installation in-
structions provided by the child re-
straint system manufacturer.
2. Guide the vehicle seat belt through the
child restraint and engage the seat belt
tongue into the buckle. Make sure the
seat belt is not twisted. Fasten the ve-
hicle seat belt firmly to the child re-
straint system according to the
installation instructions of the child re-
straint system.
3. If the child restraint system is not
equipped with a vehicle seat belt locking
device, purchase a locking clip to lock
the vehicle seat belt in place.
4. Shake the child restraint system back
and forth to make sure the child re-
straint system is firmly installed.
Install a child restraint system on the
second row middle seat
No. 5 buckle
No. 4 buckle
When installing a child restraint system, if
the No. 5 buckle
interferes, move the
No. 4 buckle
forward and hide it in the
seat cushion to make room for the No. 5
buckle
to tilt sideways, thus minimize
the interference.
Occupants safety 45
To Next Page
Loading...
Need help?
General
