EasyManuals Logo

SMART #1 2023 User Manual

SMART #1 2023
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Foot kick power liftgate
When the vehicle detects the keyfob, you
can open, close, or stop the liftgate by
kicking below the rear bumper.
The kicking motion alternately triggers the
opening and closing process.
Observe the notes on liftgate opening.
A warning sound will be issued when
the foot kick power liftgate is
opened or closed.
When kicking, make sure you stand on the
ground firmly, or you may lose balance or
fall down.
Observe the following:
If a kicking action is not recognized,
please take back your foot from the
sensing area and then kick again.
In the sensing area, please do a quick
and smooth kicking action.
The keyfob or Bluetooth key (if
equipped) needs to be behind the
liftgate.
When kicking, stand at least 30 centi-
meters away from the vehicle.
Do not touch the bumper when kicking.
Do not move too slowly when kicking.
The kick must point toward the sensor.
Sensing area.
System limitation
The system may be affected or inopera-
tive under the following circumstances:
The area around the sensor is dirty due
to snow melt, salt or snow.
Kick with artificial limbs.
The liftgate may open or close acciden-
tally under the following circumstances:
Someone's arm or leg moves within the
detection range of the sensor, such as
polishing a vehicle or picking up an
item.
Someone moves or places objects be-
hind the vehicle.
Fastening tape, tarpaulin or other cov-
ering covers the bumper.
A protective pad with a length exceed-
ing the boot frame beam is used, which
blocks the detection range of the
sensor.
The protective pad is not properly
secured.
Setting the liftgate opening angle
Manually adjusting the liftgate opening
angle
If necessary, you can set the liftgate open-
ing angle.
1. Manually open the liftgate to the desired
height.
2. Press the button
on the lower
edge of the liftgate until an audible sig-
nal is heard.
3. The opening angle is set.
Restore the maximum opening angle:
1. Manually open the liftgate to the high-
est position.
2. Press the button
on the liftgate
until an audible signal is heard.
Setting the liftgate opening angle on the
centre display
You can adjust the opening of liftgate to
the height that suits your needs.
Enter the setting interface:
Opening and closing 55

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMART #1 2023 and is the answer not in the manual?

SMART #1 2023 Specifications

General IconGeneral
BrandSMART
Model#1 2023
CategoryAutomobile
LanguageEnglish

Related product manuals