EasyManuals Logo

SMART #1 2023 User Manual

SMART #1 2023
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
tyres. The recommended tyre pressures
are suitable for cold tyres under various
driving conditions such as load and/or
speed.
Observe the notes on the tyre pressure
( Page 171).
Tyre pressure monitoring system
WARNING Importance of tyre pres-
sure abnormal indicator light
The tyre pressure monitoring system
is not a substitute for proper tyre
maintenance. It is always your re-
sponsibility to ensure that the tyre
pressure meets the value specified
by the manufacturer.
Driving with low tyre pressure may
cause tyre damage and affect the
vehicle performance and tread life,
and may affect the steering and
braking capabilities of the vehicle. If
the tyre is seriously damaged, it may
also lead to traffic accidents and
even serious casualties.
Your vehicle is equipped with an active
tyre pressure monitoring system which
monitors tyre pressure through sensors
fitted on the wheel air valve.
Enter the setting interface:
Tap
> Vehicle Condition > Tyre Con-
dition
, and tap Reflesh to check the tyre
pressure.
Tyre temperature high, tyre leakage,
sensor battery low alarm
When the tyre temperature is high, the
tyre leaks, or the sensor battery low alarm
is activated, the corresponding tyre starts
to flash, accompanied by an audio alarm,
and a message pops up on the driver infor-
mation display.
Tyre pressure low alarm
When the tyre pressure low alarm is acti-
vated, the corresponding tyre starts to
flash, the tyre pressure monitoring system
status indicator continues to illuminate
until the alarm is removed, accompanied
by an audible alarm, and a message pops
up on the driver information display. After
inflating to the standard tyre pressure in
cold state, and driving at a speed of more
than 30 km/h for a few minutes, the tyre
pressure low alarm will be removed.
A number of factors can cause a tyre
pressure monitoring system to work
abnormally:
Incompatible tyres are installed or
wheels are modified.
There is fluid in the tyre or tyre sealant
has been injected.
Driving with snow chains installed.
Near TV stations, gas stations, airports
and other facilities that generate strong
radio waves or electrical noise.
Accessories that may interfere with the
vehicle's radio receiver or electrical sys-
tem are installed.
NOTE
Check the tyre pressure regularly
and make sure it is within the speci-
fied range.
The tyre pressure monitoring system
cannot indicate in advance rapid
wear of tyres caused by external
factors (such as, tyre burst) nor
identify long-term natural uniform
pressure losses on all tyres.
If the driver information display
shows abnormal tyre pressure dur-
ing driving, park the vehicle in a safe
place and contact a smart Author-
ized Service Partner as soon as
possible.
Checking and correcting the tyre
pressure manually
Information on the recommended tyre
pressure for the vehicle's stock tyres can
be found on the tyre pressure table (
Page 172) on the driver's side B-pillar.
Always adjust tyre pressure when the tyre
is cold, cold tyre conditions:
The vehicle is driven less than 1.6
kilometers.
172 Wheels and tyres

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMART #1 2023 and is the answer not in the manual?

SMART #1 2023 Specifications

General IconGeneral
BrandSMART
Model#1 2023
CategoryAutomobile
LanguageEnglish

Related product manuals