3. If the coolant level is lower than the
marked position
, inspect or top up
coolant at a smart Authorized Service
Partner.
Do not fill coolant over the marked posi-
tion
.
Topping up the windscreen washer
system
WARNING Risk of scald caused by
hot components in the front
compartment
Some components in the front compart-
ment, such as the drive system and ra-
diator, may be very hot.
► Operate after the front compartment
cools down.
WARNING Risk of accident caused by
overheated drive system
If you open the bonnet when the drive
system is overheating or fire breaks out
in the front compartment, you may come
into contact with hot air or spilled liquid.
► Allow the overheated drive system
to cool down before opening the
bonnet.
► In case of fire in the front compart-
ment, close the bonnet and call the
fire department.
WARNING Risk of fire and injury from
windscreen washer concentrate
Windscreen washer concentrate is
highly flammable.
► Do not ignite, use naked flame,
smoke or cause spark when cleaning
with windscreen washer
concentrate.
1. Open the bonnet (→ Page 177).
2. Push away the clip and remove the
cover along the direction of the arrow.
3. Open the windscreen washer filler cap
to top up windscreen washer fluid.
Restore the windscreen washer filler cap
and the bonnet to their original position
after filling.
Maintenance and care 179
To Next Page
Loading...
