5. Screw the tow bar in and tighten it.
6. After use, return the tow bar and rear
tow bar cover to their original positions.
Type 2
1. Open the bonnet (→ Page 177).
2. Open the front luggage compartment
cover.
3. Take out the tow bar from the tool kit in
the front luggage compartment.
4. Use a suitable tool to remove the rear
tow bar cover
.
5. Screw the tow bar in and tighten it.
6. After use, return the tow bar and rear
tow bar cover to their original positions.
NOTE
When towing the vehicle, pay attention
to the vehicle location and ground
clearance. Steep trailer ramp or insuffi-
cient ground clearance may cause ve-
hicle damage when towing with the tow
bar.
Breakdown assistance 169
To Next Page
Loading...
Need help?
General
