SONIX SN32F264 - Page 55

SN32F260 Series
32-Bit Cortex-M0 Micro-Controller
SONiX TECHNOLOGY CO., LTD Page 55 Version 1.5
29:28
CFG14[1:0]
Configuration of Pn.14
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
27:26
CFG13[1:0]
Configuration of Pn.13
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
25:24
CFG12[1:0]
Configuration of Pn.12
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
23:22
CFG11[1:0]
Configuration of Pn.11
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
21:20
CFG10[1:0]
Configuration of Pn.10
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
19:18
CFG9[1:0]
Configuration of Pn.9
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
17:16
CFG8[1:0]
Configuration of Pn.8
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
15:14
CFG7[1:0]
Configuration of Pn.7
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
13:12
CFG6[1:0]
Configuration of Pn.6
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
11:10
CFG5[1:0]
Configuration of Pn.5
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
register keep low)
R/W
10b
9:8
CFG4[1:0]
Configuration of Pn.4
00: Pull-up resistor enabled.
01: Reserved.
10: Inactive. (no pull-up resistor enabled, Schmitt trigger enabled).
11: Inactive. (no pull-up resistor enabled, Schmitt trigger disabled, Data
R/W
10b