EasyManua.ls Logo

Sony MK7807V1 - Bkpf-L803

Sony MK7807V1
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applicable Models
PFV-L10 Interface unit
Supplied Accessories
Operation manual (1)
Installation manual (1)
Slot number label (1)
EX-731 Extension Board (Part
No.A-8322-598-A) (1)
Specifications
Inputs/outputs
A, B inputs:
IN connectors (BNC type) (2)
S-BUS, 2.0 Vp-p -0.5 V, 75 Ω
A, B output:
OUT connectors (BNC type) (8; 4 for
each channel)
S-BUS, 2.0 Vp-p 60.5 V, 75 Ω
Cable length:
500 m max. (When using a Belden
8281, Fujikura 5C2V or equivalent
coaxial cable)
General
Power requirements:
+5 V DC: 0.55 A (supplied from the
PFV-L Series Interface Unit)
Operating temperature:
5 to 40 °C (41 to 104 °F)
Operating humidity:
10 to 90% (no condensation)
Dimensions
Board (H x D):
77 x 267 mm
(3 1/8 x 10 5/8 inches)
Connector panel (W x H):
33 x 85 mm
(1 5/16 x 3 3/8 inches)
Mass
Board:
Approx. 100 g (4 oz)
Connector panel:
Approx. 100 g (4 oz)
Service parts: Extension board (Part
No.A-8322-598-A), Maintenance manual
1
2
3
4
1 (5)
2 (6)
3 (7)
4 (8)
S-BUS
OUT
S-BUS
DA-1
S-BUS
DA-2
4-8
SET
S-BUS
IN-1
S-BUS
IN-2
The BKPF-L803 is a two-input, eight-output S-BUS
distribution board. It can be switched to provide four
outputs from each of its inputs, or eight outputs from one
input. The Sony S-BUS router control system has already
earned an excellent reputation for the operational flexibility
it brings to many system applications. The BKPF-L803
provides a further enhancement to the capability of the
Sony router system by increasing the transmission
distance of S-BUS signals by 500 m to a total of 1,000 m.
It also provides multiple S-BUS control ports, a feature of
particular use in OB vehicles.
Features
* Two inputs * Four distribution outputs from each input *
Switchable to a single input, eight output configuration *
Equalization for up to 500 m cable (Belden 8281, Fujikura
5C2V or equivalent cable)
The BKPF-L Series function boards install in the PFV-L Series Interface Units
in any combination with other BKPF-L Series function boards.
98
Interface Processor L Series
Interface Processor L Series
BKPF-L803 S-BUS Distribution Board
Rear Panel
*SGC_0069-0098 02.3.16 5:03 PM Page 98

Table of Contents