EasyManua.ls Logo

Sony MK7807V1 - Hkpf-106 M

Sony MK7807V1
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applicable Models
PFV-HD50A HD Digital Video Interface Unit
Specifications
Inputs/outputs
Digital video signal input:
DIGITAL IN connector (BNC type) (1)
HD component serial digital signal
conforming to SMPTE291M/292M/299M
Input impedance:
75 , unbalanced
Input return loss:
15 dB or more (5 MHz to 1.485 GHz)
Transmission loss:
20 dB or less (at 742.5 MHz)
Cable length:
100 m max. (When using a 5C-FB
coaxial cable or PD-3079 COOPER
RG-6/U type Super Low Loss Digital
Video Coax or equivalent)
Digital audio signal outputs:
DIGITAL OUT AUDIO connectors (BNC
type) (4)
AES/EBU-format digital audio signal 75
,
1 Vp-p, unbalanced
Digital video signal outputs:
DIGITAL OUT VIDEO connectors (BNC
type) (2)
HD component serial digital signal
conforming to SMPTE291M/292M/299M
Output signal amplitud:
800 m Vp-p 610% (at 75 )
Output impedance:
75 , unbalanced
Output return loss:
15 dB or more (5 MHz to 1.485 GHz)
Jitter:
Within 673 ps (timing jitter)
Within 135 ps (alignment jitter)
Digital input/output system delay
Video:
1.3 µs (without lip-sync)
General
Power requirements:
+5 V DC: 1.5 A, -5 V DC: 1.2 A
(Supplied from the PFV-HD300A/HD50A
Interface Unit)
Power consumption:
Approx. 15 W
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to 55 °C (-4 to 131 °F)
Humidity:
10 to 90% (without condensation)
Dimensions
Board (H x W):
194 x 310 mm
(7 3/4 x 12 1/4 inches)
Connector panel (H x D x W):
218 x 98 x 25 mm
(8 5/8 x 3 7/8 x 1 inches)
Mass
Board:
700 g (1 lb 8.7 oz)
Connector panel:
300 g (11 oz)
HD SD IN
HD SDI OUT 1
HD SDI OUT 2
S/P P/S
AES/EBU OUT 1
AES/EBU OUT 2
AES/EBU OUT 3
AES/EBU OUT 4
A/V
DE MUX
Auto
EQ
The HKPF-106M is a video/audio demultiplexer board that
demultiplexes four AES/EBU-format digital audio signals
from a multiplexed SMPTE291M/292M/299M component
serial digital video signal. The input video signal is
distributed to two outputs. Up to eight pairs/sixteen
channels of audio can be separated from a multiplexed
HD component serial digital video signal by connecting
two HKPF-106M boards in cascade.
Features
* Demultiplexes and outputs the AES/EBU digital audio
signals from an HD component serial digital video signal *
Selection of the audio groups (1-8 or 9-16) to be
demultiplexed * Audio output channel pairs
interchangeable * Support SMPTE292M formats * 1035
(1125)/60i, 59.94i * 1080(1125)/60i, 59.94i, 50i *
1080(1125)/30PsF, 29.976PsF, 25PsF, 24PsF, 23.976PsF
* 720(750)/60P, 59.94P * Auto selection of SMPTE292M
video formats * Format indication on the front panel *
Status output
The HKPF Series function boards install in the PFV-HD Series Interface Units.
106
Interface Processor D Series
Interface Processor D Series
HKPF-106M HD Audio/Video Demultiplexer Board
Rear Panel
*SGC_0099-0116 02.3.16 5:05 PM Page 106

Table of Contents

Related product manuals