EasyManua.ls Logo

Sony MK7807V1 - Hds-X5800

Sony MK7807V1
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supplied Accessories
Operation manual (1)
BZR-20 backup software (1)
BNC T-bridge connector (1)
75 Ω terminator (5)
Maintenance manual (1)
Installation manual (1)
Optional Boards
HKS-5810M HD/SD Input Board
HKS-5810SD SD Input Board
HKS-5811M HD/SD Cascade Input Board
HKS-5811SD SD Cascade Input Board
HKS-5820M HD/SD Input Distribution Board
HKS-5830M HD/SD Matrix Board
HKS-5830SD SD Matrix Board
HKS-5860M HD/SD Output Board
HKS-5860SD SD Output Board
Optional Software
BZR-2000 Routing Switcher Control Software
The HDS-X5800 is a large-scale, multi format and multi
bit-rate routing switcher for use in Sony S-BUS systems.
The HDS-X5800 can be expanded up to a maximum
matrix size of 1056 x 272. A range of I/O module handles
signals from 143 Mb/s to 1.5 Gb/s. Remote maintenance
and remote control routing functions are available via a
100 Base-TX network. Four reference inputs and four
simultaneous S-BUS control ports are included. The four
reference inputs support the co-existence of four different
vertical interval switching times. Black burst or tri-level
sync is available. The power consumption of a 264 x 272
HDS-X5800 is approx. 900 W including a redundant
power supply unit and control board.
Features
*Highly flexible, multi bit-rate routing switcher for use in
S-BUS systems *Compact size and high packing density
— 264 x 272 in 22RU *Flexible input and output
configurations — Increments of 33 inputs and/or 34
outputs; HD/SD input and output options; SD input and
output options *Non-blocking expansion up to 1056 x
1088 *143 Mb/s to 1.5 Gb/s in the same frame *Auto
cable equalization *Auto re-clocking at 143, 177, 270,
360, 540 Mb/s and 1.485 Gb/s — Re-clocks DVB-ASI
signals with an optional HKS-5810M/5820M/5830M/
5860M board installed *Robust and powerful Sony S-BUS
control system *Quad-standard operation in a single
frame — Four vertical interval switching references; Four
S-BUS control ports *Ethernet-based remote control and
set-up *Fully redundant internal controllers and power
supplies as standard *Front loading and hot swap
modules *Low power consumption (approx. 900 W)
12
Routing Switchers
Routing Switchers
HDS-X5800 Multi Bit-Rate Routing Switcher
Rear Panel
Optional Peripherals
BKS-R1617 Multi-Display Control Unit
BKS-R1618 Universal Control Unit
BKS-R3216 Multi-BUS Control Unit
BKS-R3219 Universal Control Unit
BKS-R3220 X-Y Control Unit
BKS-R3240A X-Y Control Unit
BKS-R3242A X-Y Control Unit
BKS-R3248A X-Y Control Unit
BKS-R3280 Single Status Display Unit
BKS-R3281 Single Status Display Unit
*SGC_0011-0038 02.3.16 4:59 PM Page 12

Table of Contents