EasyManua.ls Logo

Sony MK7807V1 - Page 130

Sony MK7807V1
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applicable Models
PFV-D10 Digital Video Interface Unit
PFV-D300 Digital Video Interface Unit
PFV-D50A Digital Video Interface Unit
Specifications
Inputs/outputs
SDI inputs:
SDI IN connectors (BNC type) (8)
NTSC composite or 525/625 component
serial digital signal conforming to
SMPTE259M-A/C (ITU-R BT.601/BT.656);
143, 270 Mb/s.
(Selectable with on-board switch)
SDI outputs:
SDI OUT connectors (BNC type) (2)
Serial digital video signal of the same
format as that to the input connector
0.8 Vp-p 610%, 75
Input/output impedance:
75
Input/output return loss:
More than 15 dB (at 5 MHz to 270 MHz)
Cable length:
200 m max. (When using a Belden 8281,
Fujikura 5C2V or equivalent coaxial cable)
Rise and fall time:
Less than 1.5 ns
ISR output information
Status messages:
3 items
Setup messages:
2 items
General
Power requirements:
+5 V DC, 0.5 A, -5 V DC, 1.0 A
(Supplied from the PFV-D/PFV-HD Series
Interface Unit)
Power consumption:
Approx. 7.5 W
Operating temperature:
5 to 40 °C (41 to 104 °F)
Dimensions (H x W)
Board:
195 x 310 mm
(7 3/4 x 12 1/4 inches)
Connector panel:
195 x 25 mm
(7 3/4 x 1 inches)
Mass
Board:
Approx. 550 g (1 lb 3 oz)
Connector panel:
Approx. 200 g (7 oz)
NTSC COMPOSITE/
525/625 COMPONENT
SERIAL DIGITAL SIGNAL
INPUT
NTSC COMPOSITE/
525/625 COMPONENT
SERIAL DIGITAL SIGNAL
OUTPUT
1
2
The BKPF-300 digital video selector board is an eight
input to two output switching matrix for component digital
signals. Crosspoint information is memorized for 24
hours. Up to 14 BKPF-300 boards can be integrated to
form a 112 input, 2 output, and switching matrix.
Features
* Eight input, two output, switching matrix * Simultaneous
control of multiple signals with matrix level setting *
Control from BKS-R Series control units via S-BUS
network * Supports ISR
The BKPF Series function boards install in both the PFV-D and the PFV-HD
Series Interface Units. In a PFV-HD Series Interface Unit, they can be
installed together with the HKPF Series function boards.
BKPF-300 Digital Video Selector Board
Rear Panel
128
Interface Processor D Series
Interface Processor D Series
*SGC_0117-0132 02.3.16 5:06 PM Page 128

Table of Contents

Related product manuals