Supplied Accessories
Rack mounting plate (factory-installed) (2)
Optional Boards
BKAM-101 Analog Module
BKAM-102 AES/EBU Module
BKAM-103 SDI Module
Specifications
Inputs/Outputs
Parallel remote control interface:
TTL level, D-sub 25P (x1)
Monitor output (via remote connector):
2ch, +4 dBm, +24 dBm max., 600 Ω
Built-in speaker output:
2 W + 2 W
Headphone output:
-12 dBu at 8 Ω
Audio characteristics (via remote
connector)
Frequency response:
20 Hz to 20 kHz 61 dB
Crosstalk between channels:
Less than -75 dB at 8 kHz
Signal-to-noise ratio:
More than 90 dB
T.H.D.:
Less than 0.05% at reference level
General
Power requirements:
AC 100 to 240 V, 50/60 Hz
Power consumption:
25 W
Dimensions (W x H x D):
424 x 44 x 350 mm
(16 3/4 x 1 3/4 x 13 7/8 inches)
Mass:
5 kg (11 lb)
Features
*Analog/digital input capability; inputs are configured with
optional modules, the BKAM-101 (Analog), the BKAM-102
(AES/EBU), and BKAM-103 (SDI with embedded audio).
Up to two modules are installed in the AMS-100. *Input
selection up to 32 channels (when two modules are
installed) *Input selection using external equipment via a
remote connector *Monitoring through headphones and
external equipment *Level indication on the front panel
LED VU meters *Magnetic shielding *Compact 1RU size,
19-inch rack-mountable unit *100 to 240 V AC operation
with automatic switching
141
Interface Processor Others
Interface Processor Others
AMS-100 Audio Monitor Speaker
Rear Panel
*SGC_0133-0142 02.3.16 5:07 PM Page 141
To Next Page
Loading...
