Specifications
- Inputs/outputs -
Serial digital video input:
SDI in connectors (BNC type) (8)
Data transfer rates:
143 Mb/s to 1.485 Gb/s
Input signal:
Scrambled NRZI, 0.8 Vp-p
Input impedance:
75 Ω, unbalanced
Input return loss:
15 dB or more (5 MHz to 1.485 GHz)
Cable length:
100 m max. (When using a 5C-FB
cable (Fujikura) or Belden 1694
coaxial cable or the equivalent is
used)
Reference inputs:
Supplied through the REF IN
connectors on the PFV-SP Series signal
processing units
REF IN connectors (BNC type) (2)
Black Burst or Tri-level sync signal
Serial digital video output:
SDI out connectors (BNC type) (4)
Data transfer rates:
143 Mb/s to 1.485 Gb/s
Re-clock bit rates:
143, 177, 270, 360, 540 Mb/s:
1.485/1.001, 1.485 Gb/s
Output amplitude:
0.8 Vp-p 610%
Rise/fall time:
270 ps or less
Output return loss:
15 dB or more (5 MHz to 1.485 GHz)
Remote:
S-BUS (BNC type) (1)
Data transfer rates:
312.5 kb/s
- General -
Power requirements:
+12 V DC: 2.0 A
Operating temperature:
5 to 40 °C (41 to +104 °F)
Storage temperature:
-20 to 60 °C (-4 to 104 °C)
Operating humidity:
10 to 90% (no condensation)
Dimensions
Board (H x W):
112.2 x 388.3 mm
(4 1/2 x 15 3/8 inches)
Connector panel (W x H x D):
130 x 152.5 x 38 mm
(5 1/8 x 6 1/8 x 1 1/2 inches)
Mass
Board:
Approx. 450 g (16 oz)
Connector panel:
Approx. 300 g (11 oz)
Service part: Maintenance manual
49
Interface Processor SP Series
Interface Processor SP Series
INPUT
SDI IN x 8
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
EXPAND OUT
INT DATA BUS
EXPAND IN
RECLOCK
RECLOCK
RECLOCK
RECLOCK
S-BUS
CPU
REF A
REMOTE
REF B
*SGC_0043-0068 02.3.16 5:02 PM Page 49
To Next Page
Loading...
