Specifications
Inputs/outputs
OPTICAL IN connector:
SC/PC type (1)
Adaptive plug :
SC/PC type plug (1)
Adaptive cable:
1310 nm single mode optical fiber
Optical device:
Photo diode
Laser wavelength:
1310 nm
Input signal:
Scrambled NRZI
Optical input level:
-14.6 dBm to -4.5 dBm
SDI OUT connectors:
BNC Type (3)
Data transfer rate:
143 Mb/s to 1.485 Gb/s
Output amplitude:
0.8 V p-p 610%
Rise/fall time:
270 ps or less
Output return loss:
15 dB or more (5 MHz to 1.485 GHz)
General
Power requirements:
+ 12 V DC: 0. 37 A
(supplied from PFV-SP Series Signal
Processing Unit)
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to 60 °C (-4 to 140 °F)
Operating humidity:
10 to 90% (no condensation)
Dimensions
Board (H x W):
112.2 x 388.3 mm
(4 1/2 x 15 3/8 inches)
Connector Panel (H x D x W):
130 x 152.5 x 19 mm
(5 1/8 x 6 1/8 x 3/4 inches)
Mass
Board:
Approx. 200 g (7 oz)
Connector Panel:
Approx. 130 g (5 oz)
Service parts: Maintenance manual
Reclocker
OPTICAL IN
O/E
HD/SD SDI OUT 1
HD/SD SDI OUT 2
HD/SD SDI OUT 3
64
Interface Processor SP Series
Interface Processor SP Series
*SGC_0043-0068 02.3.16 5:02 PM Page 64
To Next Page
Loading...
