MZC-88 Installation Instructions Page 95
Figure 99
EZ-Tools Settings
For AutoSave details, refer to AutoSave under the SAVING AND BACKING UP EZ-
Pad FILES section.
For Serial Port details, refer to Quick Start section, item 7.
Auto-Protocol (IR Learning). When checked, causes certain IR codes, when learned,
to conform to a recognized code protocol. Particularly useful to obtain “clean code”
and enable toggle bit operation for learned RC5 & RC6 codes.
Audible Feedback (Beeping). When checked, enables audible beeping during IR
learning and other EZ-Tools programming actions.
VIEW
Hides or displays the
Toolbar at the top and/or the Status Bar at the bottom.
Hiding these bars will give more room for EZ-Tools when working with low monitor
screen resolution settings (such as 800x600). The Status Bar gives context sensitive
descriptions of many Tool Bar and Pop Up Menu programming actions in EZ-Tools.
Refer to Figure 100.
Toolbar
Status Bar Pop Up Menu
Figure 100
Status Bar Descriptions of Menu Items
HELP
Help Topics
Gives Instructional help when working with the total EZ-Pad system.
About EZ-Tools
Provides EZ-Tools Version and Copyright information.
To Next Page
Loading...
Need help?
General
