SpeakerCraft MZC-88 Installation Instructions

MZC-88 Installation Instructions Page 109
MZC-88 Specifications
Audio Sections
Power Output/Channel (RMS, two channels driven into 8 Ohms) 50 Watts, 20Hz to 20kHz
THD (at rated power) <0.5%
Power/Channel (RMS, 2 channels driven into 4 Ohms) 70 Watts @ 1kHz
Input Sensitivity (For rated power @ max VC) 300 µV
Input Impedance (Source Inputs) >22 K Ohms
Input Overload (Source Inputs) 2.5 V
Output Voltage @ Pre-Outs (w/300 µV @ Source Inputs) 1.7V, VC Setting, VC Max.
810 µV, NVC Setting
Output Impedance (Pre-Outs) <300 Ohms
Frequency Response (@ 1 Watt @ 8 Ohms) 20 Hz to 20 kHz
+
⁄- 1.5 dB
Channel Separation > 50 dB @ 10 kHz
Cross Talk Between Sources > 65 dB @ 10 kHz
S/N Ratio (Re: Rated Output, IEC A, Source Inputs 1k Ohm) > 95 dB (VC 20 dB below FCW)
Bass Control Range
+
⁄- 10 dB @ 100 Hz
Treble Control Range
+
⁄- 10 dB @ 10 kHz
Video Section
Bandwidth (Outputs 75 Ohms Terminated) 10 Hz to 6 MHz
+
⁄- 1dB
Input/Output Levels (Outputs 75 Ohms Terminated) 1.0V p-p
+
⁄- 5%
FM Tuner Sections
Tuning Range 87.5 to 108.0 MHz
Usable Sensitivity (IHF, 98.1 MHz) 12 dBf Mono
Sensitivity (50 dB quieting, 98.1 MHz) 18 dBf Mono, 45 dBf Stereo
S/N Ratio (65 dBf, 98.1 MHz) 75 dB Mono, 65 dB Stereo
Freq. Response (Mono or Stereo) 30 Hz to 15 kHz
+
⁄- 3 dB
Separation (@ 1 kHz, 65 dBf) > 40 dB
THD (1 kHz, 65 dBf, 98.1 MHz) 0.15% Mono, 0.2% Stereo
Capture Ratio (45 dBf) 2.0 dB
Alternate Channel Selectivity 65 dB
AM Tuner Sections
Tuning Range 520 to 1710 kHz
Sensitivity (20 dB Quieting, 1000kHz loop antenna) 750 µV/m
Selectivity (@ S/N 20dB, +/- 10 kHz) 30dB
S/N Ratio (400kHz, 10 µV/m Input @ 1000 kHz, 30% Mod.) 46 dB
THD (400kHz, 10 µV/m Input @ 1000 kHz, 30% Mod.) 0.7%
Image Rejection (1400 kHz) 38 dB

SpeakerCraft MZC-88 Specifications

General

Brand	SpeakerCraft
Model	MZC-88
Category	Amplifier
Language	English