To Next Page
J
Jessica PruittSep 9, 2025
How to resolve incorrect time display on Speco N8NXP?
- LLori Gregory MDSep 9, 2025
If your Speco Network Hardware displays an incorrect time, go to Setup to set the correct time.
How to resolve incorrect time display on Speco N8NXP?
If your Speco Network Hardware displays an incorrect time, go to Setup to set the correct time.
How to resolve no results when searching recordings on Speco N8NXP?
If you're getting no results when searching recordings on your Speco Network Hardware, the HDD may be malfunctioning. Check HDD status in settings. Also, the recorded file may have been overwritten, or the record function may have been disabled.
How to fix unable to log in remotely on Speco N8NXP?
If you're unable to log in remotely to your Speco Network Hardware, ensure that ActiveX control is enabled in Internet Explorer. Also, check your network settings and verify that your password and username are valid. Check the credentials locally on the unit and make sure the credentials are correct.
How to optimize output display on Speco Network Hardware monitor?
To optimize the output display on your Speco Network Hardware monitor, check the display output setting and set it to the correct resolution to match the monitor.
Guidelines for safe electrical installation and operation to prevent shock.
Detailed technical data including connections, resolution, storage, and power.
Operating and configuring PTZ camera functions like presets and tours.
Setting up motion, tampering, and video loss detection for security events.
Configuring network settings like TCP/IP, PPPoE, DDNS, and UPnP for connectivity.
Updating firmware, restoring factory defaults, and system maintenance.
Connecting to the NVR via a web browser and logging into the interface.
Configuring cameras, streams, and network settings remotely via the web interface.
Resolving problems related to booting, running, HDD detection, and video output.
Troubleshooting network stability, file backup errors, and remote viewing problems.
General| Operating System | Embedded LINUX |
|---|---|
| HDD Bays | 1 |
| Type | Network Video Recorder |
| Channels | 8 |
| IP Camera Input | 8 |
| Interface | HDMI, VGA |
| Resolution (VGA) | 1920x1080 |
| Decoding Capacity | 8-ch @ 1080p |
| Multi-screen Display | Yes |
| OSD | Yes |
| Ethernet | RJ-45 port (10/100Mbps) |
| Network Interface | 1x RJ-45 10/100/1000 Mbps |
| Protocols | HTTP, TCP/IP, IPv4, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, DDNS |
| Smart Phone | iOS, Android |
| Internal HDD | 1 SATA Port |
| USB | 2 USB 2.0 |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Compression | H.265, H.264 |
| Resolution | Up to 8MP (3840x2160) |
