Stenograph LUMINEX - Test Mode

93
2019 Stenograph, L.L.C. All Rights Reserved.
93
Luminex Users Guide
Chapter 3 Writing on the Luminex
Test Mode
Test Mode is designed for situations where you are taking a test or writing in a secure location that
restricts you from leaving the environment with any copy of the proceedings on your Luminex. In Test
Mode, the Luminex writes only to the Data SD card, regardless of your settings. No files are written to
memory or the Backup SD card and all audio recording features are disabled.
To turn Test Mode On or Off:
1. From the Opening Menu, touch Setup, More, Test Mode. The current status of Test Mode
displays on the screen.
2. Do one of the following:
· Touch Off to disable Test Mode. The Status and Menu bars return to the normal blue display
color.
· Touch On to use Test Mode. The Status and Menu bars display in red. The Luminex
remains in Test Mode until you turn the feature Off or turn the Luminex Off.
3. To display the Opening menu, touch OK, More, Quit.