27
2019 Stenograph, L.L.C. All Rights Reserved.
27
Luminex Users Guide
Chapter 2 Hardware
Routine Maintenance
Although little maintenance is required for your Luminex, covering it when not in use is suggested.
Daily/Monthly
·
Cover the Luminex when it is not in use.
·
Clean the tilting screen (when needed).
Always protect the tilting screen of your Luminex by removing all grit before cleaning. To remove
grit, use a soft brush to light brush the grit away before using the cleaner and micro-fiber cloth.
ü
Turn the Luminex Off. It is easier to see the areas that are dirty when the screen is dark.
ü
Very gently wipe the screen using the cleaning cloth that came with your Luminex or a
microfiber cloth available in computer, camera and eyeglass stores. Do not use materials
such as paper towels, tissue paper or your shirt sleeve. These non-ultra-soft materials can
easily scratch the screen. Do not press hard on the screen. Pushing directly on the Tilting
screen can cause pixels to burn out.
ü
If the cloth does not completely remove the dirty areas, dampen the cloth with the optical-
quality spray cleaner that came with your Luminex or a cleaner designed for flat screen
monitors or eyeglasses, and very gently wipe the screen. Do not spray the display screen
directly. Liquid can run along the inside the edge of the screen and cause damage. Never
use cleaning products that contain ammonia, ethyl alcohol, acetone, toluene, ethyl acid, or
methyl chloride. These chemicals can react with the materials in the display screen and
cause damage.
·
Clean the shell (when needed).
Always protect the shell of your Luminex by removing all grit before cleaning. To remove grit,
use a soft brush to lightly brush the grit away before using the cleaner and soft cloth.
ü
Use mild soap and water or multipurpose cleaner using a soft cloth.
ü
Apply sparingly and avoid contact with the tilting screen and the cleaner.
ü
If using a spray bottle, spray the mild soap and water on a soft cloth and wipe the body of the
writer. Never use cleaning products that contain ammonia, ethyl alcohol, acetone (fingernail
polish remover), toluene, ethyl acid, or methyl chloride.
·
Clean the keyboard with any good clear furniture polish.
Extra Cleaning / Refurbishment
To help you keep your Luminex operating at its peak performance, a service reminder message will
appear two years from the date you loaded a Luminex software update dated August of 2019 or later.
The reminder will appear when the writer is powered on and will be accompanied by the appearance
of a wrench icon on the Title Bar of the Luminex display. To ensure you continue to have the best
To Next Page
Loading...
