28
2019 Stenograph, L.L.C. All Rights Reserved.
28
Luminex Users Guide
Chapter 2 Hardware
possible experience writing on your Luminex, it is important to have the Extra (refurbishment) service
every two years. Here is an example of the reminder message:
Selecting OK will stop the reminder from appearing the next time you power on the Luminex. The
Wrench icon will remain. The display of the Wrench icon is a visual reminder that service is
suggested for the writer. It has no influence on the normal operation of the writer. Touching the
Wrench icon will bring you to the Service Reminder screen. This is equivalent to selecting More,
Status, Service from the opening screen. The Service Reminder screen has details about the Extra
(refurbishment) service offered exclusively by Stenograph.
The Wrench icon display and next service date will be reset by a Stenograph Service Technician after
the Extra (refurbishment) service is performed. Prior to the appearance of the service reminder, you
can view when the next recommended service date is by selecting More, Status, Service, from the
opening screen.
To Next Page
Loading...
