44
2019 Stenograph, L.L.C. All Rights Reserved.
44
Luminex Users Guide
Chapter 3 Writing on the Luminex
Case CATalyst V13 or Higher
The Luminex Brief It feature is designed for situations in which you are not writing realtime to your CAT
system. If you are using Case CATalyst V13 or higher, defines are exchanged between Case
CATalyst and the Luminex while writing realtime. It is strongly recommended to only use the Brief It
feature on your Luminex or Case CATalyst but not both locations.
If you are using the Brief It feature on your Luminex with Case CATalyst V13 or higher, selecting to
Undo a global, Undo Last Global or delete a global in Case CATalyst does not remove the definition
from the dictionary in the Luminex memory or the job dictionary for the file on the Luminex. To remove
J-Defines from the Luminex, it is necessary to clear them from the dictionary stored in memory.
Managing Briefs
The Luminex Suggested and Reminder briefs, along with used briefs, display in the Brief It pane in a
color coded background. The newest and last used briefs display at the bottom of the list. Suggested
briefs have a yellow background, used briefs a gray background and Reminder briefs a green
background.
To manage briefs during a job, touch More, More, Brief It. The title bar of the Brief It pane turns blue,
indicating it has cursor focus. Use the Scroll Dwn and Scroll Up sensors to position the cursor on
the desired brief. The cursor location is indicated with a dark gray color on the edge of the Brief It
pane.
To Next Page
Loading...
