Stenograph LUMINEX - Tilting Screen Appearance; Set Tilting Screen Text Colors

95
2019 Stenograph, L.L.C. All Rights Reserved.
95
Luminex Users Guide
Chapter 3 Writing on the Luminex
Tilting Screen Appearance
You can adjust the text color, font size and backlight level from the Opening Menu or while writing a
job.
Set Tilting Screen Text Colors
The Luminex tilting screen can display text in several different colors. You can set separate colors for
untranslates, questions symbol, answer symbol, text and conflicts.
To change the Tilting screen text colors:
1. Do one of the following:
· From the Opening menu, touch Setup, Display.
· From the First Writing menu, touch More, Setup, Display.
2. From the Display menu, touch Color. The Color menu displays sample text showing the current
color assignment for each text type.
3. Move the pointer (>>) using the Down/ Up sensors to the item you want to change.
4. Cycle through the available colors using the Color and Color sensors. The item displays in
the selected color under the New Color Assignment column. Some colors are less noticeable due
to their subtle differences.
5. Repeat steps 3 and 4 to change the color for other items.
6. When finished selecting colors, touch Accept. To exit the Color screen without changing the color,
touch Quit.
7. The Display menu reappears. The color selection remains until you change them.
8. Do one of the following:
· When changing colors before beginning a job, return to the Opening Menu by touching OK,
More, Quit.
· When changing colors while writing, continue writing. The First Writing menu redisplays.