Stenograph LUMINEX - Options

75
2019 Stenograph, L.L.C. All Rights Reserved.
75
Luminex Users Guide
Chapter 3 Writing on the Luminex
Options
The Luminex Options allow you to switch the USB communication between Standard and élan Mira®
emulation, select your keyboard layout language (International), adjust Beeper Volume, view strokes
per minute job statistics, prompt or automatically delete J-defines from the writer’s memory, select a
prompt when ending a job and change the save setting for TrueStroke files.
To access Options:
1. From the Opening Menu, touch Setup, More, Options.
2. For details about each option, see the appropriate topic in this chapter:
· "Language"
· “Keyboard Layout"
· "USB Communication"
· "Beeper Volume”
· “Function keys (touch sensors) during job"
· "Prompt to confirm ending job"
· "Clear J-defines when turning on/ending job”
· "Display strokes per minute (SPM)"
· "Save TrueStroke Files to Data SD Card"
Language
The Language option allows you to change the Luminex menus and options display in the selected
language. If you choose an option other than English, you need to save your settings (touch OK) and
turn the Luminex Off and then On. Three language options are available: English (default), Italian and
French.
To change the display language for menus and options:
1. From the Opening menu, touch Setup, More, Options.
2. Touch the Change sensor to toggle the option between French, Italian and English (default). If you
select Italian or English, you need to touch OK to save the changes and then turn the Luminex Off
and then On for the menus and options to display in the correct language.
3. To display the Opening menu, touch OK, More, Quit.