Stenograph LUMINEX - Display Strokes Per Minute (SPM) Option; Truestroke

79
2019 Stenograph, L.L.C. All Rights Reserved.
79
Luminex Users Guide
Chapter 3 Writing on the Luminex
· Never - means the J-defines will never automatically be deleted from the writer's memory. You
can manually clear J-defines in memory from the Opening menu by selecting Dict., J-Defines
and then Clear.
· Ask - means you will be prompted at the end of each job and/or when turning the Luminex On
when J-defines exist. The following message displays:
Ready to delete all J-defines from this writer's memory. Are you sure?
- Select Yes to clear (delete) the J-defines from memory. The following message displays:
All J-defines deleted from this writer's memory.
Select No to retain the J-defines in the writer’s memory. You will be prompted to delete all j-
defines each time you turn the machine on and/or when ending a file.
· Always - means the J-defines will automatically be deleted when closing a file or when turning
the Luminex On. The following message displays:
All J-defines deleted from this writer's memory.
4. To save the settings and display the Opening menu, touch OK, More, Quit.
Display Strokes Per Minute (SPM) Option
The Display Strokes Per Minute option allows the average number of strokes per minute to display on
the Luminex Title bar and saved to the Status screen. While writing, the Title bar shows the
approximate number of strokes per minute, followed by SPM. While writing, the Status screen shows
strokes per minute data for the current job. When you are not writing and access the Status screen
(Opening menu, More, Status) shows strokes per minute data for the most recent job. If you do not
show the Strokes Per Minute information, then the Luminex tracks the total number of strokes.
To set the Strokes Per Minute information:
1. From the Opening menu, touch Setup, More, Options.
2. Touch the Down/ Up sensors as necessary to highlight the Display Strokes per minute (SPM)
option.
3. Touch the Change sensor to toggle the option between Yes and No. Yes is the default.
· Yes - displays the strokes per minute information on the Title bar and the Status screen.
· No - displays the total number of strokes in the current job (while writing) or the total strokes
written on the Luminex when not in a job.
4. To display the Opening menu, touch OK, More, Quit.
TrueStroke
TrueStroke technology is a sophisticated algorithm that tracks the direction and velocity of keystrokes.
This detailed information gives you a visual indication of what steno keys were pressed, how long they