Stenograph LUMINEX - Clear Memory; Information

74
2019 Stenograph, L.L.C. All Rights Reserved.
74
Luminex Users Guide
Chapter 3 Writing on the Luminex
Clear Memory
Although it is not usually necessary to clear the memory, if the need arises you can clear all files from
memory. The Luminex memory never becomes full, the oldest files are always overwritten.
1. From the Opening menu, touch Storage, Memory.
2. To clear all files from Memory, touch Clear. At the Ready to Clear All Files in Memory. Are you
Sure? confirmation prompt, do one of the following:
· To remove all the files from memory, touch Yes.
· To cancel the removal of files from memory, touch No.
3. To return to the Opening menu, touch Quit.
Information
After selecting Memory from the Storage menu and then selecting Information, the Memory dialog box
displays the Volume Label, free space and percentage of free space available in memory. The
Luminex memory is approximately 8 GB. Although there is a lot of free space available, the Memory
feature should not be used as an archive, you should perform your regular backups of steno files and
archival. The extra memory space may also be used for future features and enhancements. Touch
OK to dismiss the Memory dialog box.