55
2019 Stenograph, L.L.C. All Rights Reserved.
55
Luminex Users Guide
Chapter 3 Writing on the Luminex
Electronic Marks
Use the Mark function to electronically mark locations in your steno notes. For example, let's say that
you hear something and you want to go back to it in your steno notes when there is a break. You could
touch the Mark sensor and then use the Search feature to locate the Marks in the file.
To mark your steno notes:
1. From the First Writing menu, touch either Mark sensor or the touch screen menu item.
When no dictionary definition exists for the Mark, the untranslate displays as /! in the Text and in
the Vertical Notes on the tilting screen. If you have defined the Mark in your dictionary, the
exclamation mark (!) displays in the Vertical Notes and the text definition displays in the text.
If the option Function keys (touch sensors) during job option is set to Off, you will need to use the
touch screen Mark menu item.
2. Continue writing.
To Next Page
Loading...
