Stenograph LUMINEX - Status

91
2019 Stenograph, L.L.C. All Rights Reserved.
91
Luminex Users Guide
Chapter 3 Writing on the Luminex
Status
Status displays information about the Luminex. The status screen indicates:
· Software version.
· When a job is opened, the name of the job is displayed.
· The approximate number of strokes per minute including the minimum, maximum and average
for the job. If you are not displaying the strokes per minute information, then this information
does not display.
· The total number of strokes to date for all jobs taken.
· Keyboard type and Serial Protocol.
· The amount of space left on the Data SD card and whether or not the card is write enabled.
· When the AC adapter/charger is charging.
· If Bluetooth is turned on, the status indicates target computer numeric ID, computer name and
the Passkey, when applicable. If Bluetooth is turned off, status indicates Bluetooth powered off.
For more information please see the Stenograph Bluetooth Wireless Communication guide
included in the Stenograph Bluetooth Wireless Realtime kit for information on Bluetooth wireless
communication set up, configuration and use.
· Main Battery status.
To access the Status screen while writing:
1. At the writing menu, touch More and then Status.
2. To return to the writing screen, continue writing or touch OK.
To access the Status screen when not in a job:
1. At the Opening menu, touch More and then Status.
2. To return to the previous menu, touch OK.