40
2019 Stenograph, L.L.C. All Rights Reserved.
40
Luminex Users Guide
Chapter 3 Writing on the Luminex
Auto-Conflict Resolution
Auto-Conflict Resolution, when turned On, automatically selects the first choice of the conflict. This
prevents the display of conflicts on the Luminex screen for easier readback. This option does not
affect the realtime output when writing realtime to a computer.
To turn Auto-Conflict On or Off:
1. From the Opening Menu, touch Setup, Trans. Opt. The current status of the Auto-Conflict
Resolution option displays on the screen.
2. Touch the Down/ Up sensors as necessary to highlight the Auto-Conflict Resolution option.
3. Press the On/Off sensor to toggle the Auto-Conflict Resolution option On or Off.
4. To display the Opening menu, press OK, More, Quit.
To Next Page
Loading...
