Stenograph LUMINEX - Tilting Color Touch Screen; Cleaning the Tilting Screen

24
2019 Stenograph, L.L.C. All Rights Reserved.
24
Luminex Users Guide
Chapter 2 Hardware
Tilting Color Touch Screen
The Luminex tilting color screen is a high resolution, WVGA display. The “non-glare finish” reduces
glare from overhead lights. The display folds flat for storage or transport and opens to lay flat to fit
under a conference table.
To use the Tilting screen, gently pull up on the display and adjust the tilt as necessary. Gently pull
forward on the display to fold it flat to cover the keys. Gently push the display back to lay flat to fit under
a table. When the Luminex is On and the display is folded flat, the display remains On.
You can adjust the brightness, text color and font size on the Tilting screen. Adjusting the screens
backlight brightness can reduce battery usage.
Depending on the selected function, the tilting touch screen shows:
· the title bar with a battery icon, battery gauge reflecting the approximate main battery level, audio
recording status when audio is active, the number of steno strokes for the open file and the
estimated number of pages for the open file.
· the transcript text, steno, brief suggestions or file number messages.
· menu bar from which you select options or perform an action.
· warning messages, such as “Low Battery.”
Cleaning the Tilting Screen
1. Turn the Luminex Off. It is easier to see the areas that are dirty when the screen is dark.
2. Very gently wipe the screen using the cleaning cloth that came with your Luminex or a microfiber
cloth available in computer, camera and eyeglass stores.
Do not use materials such as paper towels, tissue paper or your shirt sleeve. These non-ultra-soft
materials can easily scratch the screen.
Do not press hard on the screen. Pushing directly on the Tilting screen can cause pixels to burn
out.
3. If the cloth does not completely remove the dirty areas, dampen the cloth with the optical-quality
spray cleaner that came with your Luminex or a cleaner designed for flat screen monitors or
eyeglasses, and very gently wipe the screen.
· Do not spray the display screen directly. Liquid can run along the inside the edge of the screen
and cause damage.
· Never use cleaning products that contain ammonia, ethyl alcohol, acetone (fingernail polish
remover), toluene, ethyl acid, or methyl chloride. These chemicals can react with the materials
in the display screen and cause damage.
4. Clean the plastic edge that surrounds the screen with any multipurpose cleaner using a soft cloth.
Avoid contacting the screen itself with the cleaner.