Stenograph LUMINEX - Memory; View and Copy Memory Files

To Next Page

To Previous Page

Luminex Users Guide

Chapter 3 Writing on the Luminex

Memory

The Luminex uses memory to store steno notes and timestamp files as additional backup to the Data

SD and Backup SD cards. Steno note files stored in memory remain even when you turn the Luminex

Off. You can save individual or multiple steno note files that are stored in memory to a Data SD card

or thumb drive in the rare instance you need to retrieve a file.

In addition to steno files and timestamp information, the Luminex memory also stores dictionaries, j-

defines made on the Luminex, user settings and log files. The Luminex memory has approximately 6

GB of space. You can view the available space in memory, copy files from memory or clear the

memory. If you decide to clear the memory, you are only removing access to the steno notes and

timestamps from memory, you are not removing your dictionaries, j-defines, log files or user setting

information.

View and Copy Memory Files

The memory screen displays the list of files in a year, month, date and time format: 20170816-142341

(August 16, 2017 2:23:41 p.m.). By default, the newest file is listed first. The file size and the

estimated number of transcript pages shows for each file. Timestamp files are part of the steno note

file. They are not visible in the list.

Files in memory can be copied to the Data SD card or to a thumb drive. Files are automatically copied

to the root directory of the destination drive. When copying to a thumb drive, be sure to insert your

USB device before copying files.

To view and copy memory files:

1. From the Opening menu, touch Storage, Memory.

2. Steno note files display with the newest folder first. Use Date Sort to toggle files between

ascending and descending order.

3. Touch the Down/ Up sensors to move to the desired file and touch Select. You can select to

copy any or all of the files in memory.

4. When finished selecting files, touch Copy. The Luminex prompts you to copy to the Data SD card

or a thumb drive. When copying to a thumb drive, ensure you insert the thumb drive into USB A

(host) port before copying.

5. Touch one of the following:

Data Card

Thumb Drv

6. Files are copied to the root of the storage destination.

7. The Opening menu displays. If you need to remove the Data SD Card or thumb drive, turn the

Luminex Off and then remove the card/drive.

Related product manuals