Stenograph LUMINEX - A;An Resolution

35
2019 Stenograph, L.L.C. All Rights Reserved.
35
Luminex Users Guide
Chapter 3 Writing on the Luminex
A/An Resolution
A/An resolution automatically selects the correct word, “a” or “an” based on the word that follows. The
steno translates as “a” before consonants and as “an” before vowels and the numeral 8. The steno, A,
must be defined as "a" (no quotes) in your dictionary in order for the A/An Resolution feature to work. If
the dictionary entry is defined as a conflict between "a" and "an," this feature does not work as
described.
To turn A/An resolution Off or On:
1. From the Opening Menu, touch Setup, Trans. Opt. The current status of the A/An option displays
on the screen.
2. Touch the Down/ Up sensor or menu items as necessary to highlight the A/An option.
3. Touch the On/Off sensor to toggle the A/An option On or Off.
4. To display the Opening menu, touch OK, More, Quit.