Instruction Manual for AS380 Series Elevator Integrated Drive Controller
The menu realizes the reset of control parameter F200-F255. Please note the control parameter
reset is only valid when the login level is equal or more than the level-2. There is no use to press
enter button if the login level is not qualified. Once the login qualification is met, press the enter
button to enter into the menu for the authentication code input (the authentication code setting is
against the misoperation. The authentication code always is 5678) if the authentication code is
right, press the enter button and control parameter reset.
21 fault coder reset
The menu realizes the fault code reset. Please note the fault code reset is only valid when the login
level is equal or more than the level-2. There is no use to press enter button if the login level is not
qualified. Once the login qualification is met, press the enter button to enter into the menu for the
authentication code input (the authentication code setting is against the misoperation. The
authentication code always is 5678) if the authentication code is right, press the enter button and
control parameter reset.
22 drive program version
The menu shows the program version of drive part of integrated unit. The screen will display the
program version 30.03 after 1 second waiting. Then the word ver1 and 30.03 will alternatively
display, each of which will last for 1 second
23 control program version
To Next Page
Loading...
Need help?
General
