STEP AS380 Series User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
Chapter 5 Operator
73
Nixie
tube
display
luminous
diode code
Display content
remark
L6
up level-1 forced deceleration switch on-off
L7
up level-2 forced deceleration switch on-off
L8
up level-3 forced deceleration switch on-off
L9
up level-4 forced deceleration switch on-off
L10
up limit switch status- light off, do not move up
L11
up leveling switch on-off
L12
down leveling switch on-off
LED 02
L1
door lock relay ( X17/parameter setting-if no normal light)
Quick car running
startup condition. All
these 11 light on
means the peripheral
signal ok, the startup
condition for quick car
running is met
L2
main contactor contact input signal ( contactor no adhesion and
light on)
L3
band brake contactor contact input signal( contact no adhesion and
light on)
L4
band brake switch
L5
motor overheating
L6
up limit switch ( compound) status signal
L7
down limit switch ( compound ) status signal
L8
door close limit switch signal ( front and rear door)
L9
light on when no internal startup fault exist
L10
front valid signal registration existed or not
L11
auto hi-speed status signal
L12
main contactor drive signal
The internal status of
quick car running. All
six light on one by one
when the quick car run
normally.
L13
enable signal
L14
up direction/down direction signal
L15
running signal feed from drive part
L16
band brake contactor drive signal
L17
speed curve given or not
LED 03
L1
front door open limit on-off
Door open/close
signal. Light on mean
external input point is
connected.
L2
front door close limit on-off
L3
rear door open limit on-off
L4
rear door close limit on-off
L5
front door safety edge switch on-off
L6
rear door safety edge switch on-off
L7
front door light curtain switch on-off
L8
rear door light curtain switch on-off
L9
overload switch on-off
L10
door open button signal
L11
door close button signal
L12
present floor door open signal
L13
light on when in attendant status or independent status
L14
light on when in firemen operation status
L15
front door open output
L16
front door close output
L17
rear door open output
L18
rear door close output
LED 04
L1
main contactor contact input on-off
Contact inspection
signal, light on mean
external signal
connected.
L2
band brake contactor contact input on-off
L3
No 1 band brake inspection switch contact input on-off
L4
No 2 band brake inspection switch contact input on-off
L5
safety circuit high-voltage point input on-off
L6
safety circuit relay contact input on-off
L7
door lock circuit high-voltage point input on-off
L8
door lock relay contact point input on-off
L10
main contactor drive output
L11
band brake contactor drive output
LED 05
L1
down limit switch status
Main input signal
logic status
L2
down level-1 forced deceleration switch status

STEP AS380 Series Specifications

General

Brand	STEP
Model	AS380 Series
Category	Controller
Language	English