Preventative Maintenance
38
CHECKLIST
All fasteners secure (reference all assembly prints)
Engage brake pedal and push on the bed to verify all casters lock securely
”Brake Not Set” LED (on foot board) blinks when brakes are not engaged
Locking steer caster engages and disengages properly
Siderails move, latch and stow properly
CPR release working properly
Foot prop intact and working properly
I.V. pole working properly
Foley bag hooks intact
Optional CPR board not cracked or damaged and stores properly
No cracks or splits in head and foot boards
No rips or cracks in mattress cover
All functions on head end siderails working properly (including LED’s)
All functions on footboard working properly (including LED’s)
Optional Scale and Bed Exit systems calibrated properly
Motion Interrupt switches working properly
Night light working properly
Power cord not frayed
No cables worn or pinched
All electrical connections tight
All grounds secure to the frame
Ground impedance not more than 100 milliohms
Current leakage not more than 300 microamps
Apply grease to litter grease points
Engage drive wheel and ensure it is operating properly (Zoom option)
Motion release switches working properly (Zoom option)
Confirm Head End Control Panel functionality (Zoom option)
Confirm battery powered functionality (Zoom option)
Bed Serial No.
Completed By:_________________________________ Date:_____________
To Next Page
Loading...
Need help?
General
