Introduction
5
INTRODUCTION
This manual is designed to assist you with the maintenance of the Stryker Model 3002 Secure II Bed. Read
it thoroughly before using the equipment or beginning any maintenance on it.
SPECIFICATIONS
Safe Working Load 500 pounds (227 kilograms)
Scale System Capacity (optional equipment) Loads weighing up to 500 pounds (227 kilograms)
Scale System Accuracy
(optional equipment)
$ 2 pounds at 0 − $ 10 Trend for patients weighing 100
pounds or less
$2% of total patient weight at 0 − $ 10 Trend for patients
weighing greater than 100 pounds
Overall Bed Length/Width − Standard Bed 93” x 42.5” (siderails up) − 36” (siderails down)
236 cm. x 108 cm. (siderails up) − 92 cm. (siderails down)
Overall Bed Length/Width − Short Bed 85” x 42.5” (siderails up) − 36” (siderails down)
216 cm. x 108 cm. (siderails up) − 92 cm. (siderails down)
Overall Bed Length/Width − Zoom Bed 95” x 42.5” (siderails up) − 36” (siderails down)
241 cm. x 108 cm. (siderails up) − 92 cm. (siderails down)
Overall Bed Length/Width − Zoom Short Bed 87” x 42.5” (siderails up) − 36” (siderails down)
221 cm. x 108 cm. (siderails up) − 92 cm. (siderails down)
Patient Sleep Surface − Standard Bed 84” x 35” − 213 cm. x 89 cm.
Patient Sleep Surface − Short Beds 76” x 35” − 193 cm. x 89 cm.
Bed Height to Top of Seat Litter − 6” Casters
(Add 2 inches if the bed has 8” casters.)
16” to 30” $0.5 / 41 cm. to 76 cm.
Beds with Zoom Option −19.75” x 30” − 50 cm. x 76 cm.
Short Beds with Zoom Option −20.5” x 30” − 52 cm. x 76 cm.
Litter Platform to Top of Siderail (Full Up) 15” Head End Siderail, 14” Foot End Siderail
Space Between Siderails (Full Up) 8” − 9.125”
Knee Gatch Angle 0 to 40
Fowler Angle 0 to 60
Trendelenburg/Reverse Trendelenburg −12 to +12 $1
−10 to +10 $1 − Beds with Zoom Option
−8 to +8 $1 − Short Beds
Electrical Requirements − all electrical re-
quirements meet UL 2601 specifications.
115 VAC, 60 Hz, 7.0 Amp.
Optional: 230 VAC, 50/60 Hz, 4.0 Amp.
Outlet Option 125 VAC, 60 Hz, 10.0 Amp (not available with Zoom option)
Stryker reserves the right to change specifications without notice.