12 EN/01.2019/G22 © STULZ GmbH – all rights reserved
EC TOWER TECHNICAL MANUAL
4. Transport / Storage
4.1 Delivery of units
Stulz A/C units are mounted on pallets and packed several times in plastic film.
NOTE
The refrigerant circuit is filled with inert gas.
Construction of protective covering:
(from inside to outside)
The following information can be found
on the packing:
1. Neopolene cushioning
2. Shrink film
1) Stulz logo
2) Stulz order number
3) Type of unit
4) Packing piece - contents
5) Warning symbols
NOTICE
When delivery is accepted, check the unit against the consignment papers for completeness
and for external damage and record it on the consignment note in the presence of the freight
forwarder.
• You receive the consignment papers with the delivery of the A/C unit.
• The shipment is made ex works, in case of shipment damages, please assert your claim towards the
carrier.
4.2 Transport
DANGER
Mortal danger by crushing
A defective lifting device can lead to the uncontrolled fall of the A/C unit.
Do not stay under suspended loads!
The Stulz A/C units can be moved by lifting devices with belts or ropes.
• x the belts or ropes at the pallet,
• protect the upper unit edges by wooden laths or metal brackets in such a way that they could not be caved
in.
To Next Page
Loading...
