13 © STULZ GmbH – all rights reserved EN/01.2019/G22
EC TOWER TECHNICAL MANUAL
NOTICE
Risk of distorting the frame
Never move the unit on rollers and never transport it on a fork lift without pallet.
4.3 Storage
If you put the unit into intermediate storage before the installation, the following measures have to be carried
out to protect the unit from damage and corrosion:
• the storage point must not be exposed to direct sunlight. Observe the storage conditions in the chapter
“Application limits“.
• store the unit packaged to avoid the risk of corrosion.
You can move the unit still packaged on the pallet with a fork lift truck.
• take care that the centre of gravity is within the fork surface.
• take care that the unit is in an upright position at the transport.
To Next Page
Loading...
