Figures xi
FIGURE 11-3 Positioning the SBus Card 11-5
FIGURE 11-4 Connecting the SBus Card 11-6
FIGURE 11-5 VSIMM Slot Location 11-8
FIGURE 11-6 Removing the VSIMM 11-9
FIGURE 11-7 Installing the VSIMM 11-10
FIGURE 11-8 Typical DSIMM 11-11
FIGURE 11-9 DSIMM Slot Locations 11-12
FIGURE 11-10 Removing a DSIMM 11-15
FIGURE 11-11 Installing a DSIMM 11-17
FIGURE 11-12 Main Logic Board Layout—SPARCclassic/SPARCclassic X 11-19
FIGURE 11-13 Main Logic Board Layout—SPARCstation LX (Part 270-2233) 11-20
FIGURE 11-14 Main Logic Board Layout—SPARCstation LX (Part 270-2474) 11-21
FIGURE 11-15 Extracting the Main Logic Board 11-27
FIGURE 11-16 Raising the Speaker/LED Assembly 11-27
FIGURE 11-17 Removing and Replacing the Main Logic Board 11-28
FIGURE 11-18 Plugging in the Main Logic Board 11-30
FIGURE 11-19 Locating the NVRAM 11-32
FIGURE 11-20 Removing the NVRAM 11-32
FIGURE 11-21 Default SPARCstation LX ISDN Jumper Settings 11-33
FIGURE 12-1 Exploded View of the Unit Top 12-2
FIGURE 12-2 Exploded View of the Unit Bottom 12-3
FIGURE 12-3 Exploded View of the Disk Drive Mounting Bracket 12-4
FIGURE B-1 Attachment Unit Interface (AUI) Connector B-2
FIGURE B-2 Twisted-Pair Ethernet Connector B-3
FIGURE B-3 ISDN Terminal Endpoint Connector B-3
FIGURE B-4 ISDN Network Termination Connector B-4
FIGURE B-5 Keyboard/Mouse Connector B-5
FIGURE B-6 External SCSI Connector B-6
To Next Page
Loading...
Need help?
General
